5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp600.000
Molykote D-321R Anti-Friction Coating Spray
Rp600.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Molykote D 321 R Anti Friction Coating Spray
• Air curing gives quick and easy application
• Excellent Adhesion, even on smooth surfaces
• Protection against stick-slip
• Extremely low coefficient or friction
• Wide service temperature range
For metal/metal combinations with slow to medium fast movements and high loads
Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements of intermittent operation
Improving the running-in process and for lubrication under high vacuum and extreme temperatures
Used successfulyy for cylinder-head bolds, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel
Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel
Composition:
- Solid lubricants
- Solvents
- Binder
Drying Time:
After five minutes at 23°C the applied film of Molykote D-321 R Anti-Friction Coating is touch-dry; this process time can be reduced to one (1) minute exposing the coated part to hot air at 80°C.
Curing Time:
After a curing time period of two (2) hours at 23°C the dry film of Molykote D-321 R Anti-Friction Coating can perform the best lubrication properties.
• Air curing gives quick and easy application
• Excellent Adhesion, even on smooth surfaces
• Protection against stick-slip
• Extremely low coefficient or friction
• Wide service temperature range
For metal/metal combinations with slow to medium fast movements and high loads
Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements of intermittent operation
Improving the running-in process and for lubrication under high vacuum and extreme temperatures
Used successfulyy for cylinder-head bolds, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel
Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel
Composition:
- Solid lubricants
- Solvents
- Binder
Drying Time:
After five minutes at 23°C the applied film of Molykote D-321 R Anti-Friction Coating is touch-dry; this process time can be reduced to one (1) minute exposing the coated part to hot air at 80°C.
Curing Time:
After a curing time period of two (2) hours at 23°C the dry film of Molykote D-321 R Anti-Friction Coating can perform the best lubrication properties.
Ada masalah dengan produk ini?