NAD C 328 C328 Digital Stereo integrated amplifier

ANALOG IN/HEADPHONE OUT
THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response
Output impedance
ANALOG IN/SUBWOOFER OUT THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response
Gain
Output impedance
ANALOG IN/SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Gain
Clipping power
IHF dynamic power
Peak output current Damping factor Frequency response Channel separation
Input sensitivity (for 40 W in 8 ohms) Standby power
PHONO IN/SPEAKER OUT
THD (20 Hz – 20 kHz) Signal-to-Noise Ratio
>100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain) ±0.3 dB (20 Hz - 20 kHz)
11 ohms
>100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain) ±0.2dB(20Hz-20kHz)
17 dB
200 ohms
50W (ref. 20 Hz-20 kHz at rated THD, both channels driven) >95 dB (A-weighted, 500 mV input, ref. 1 W out 8 ohms)
37 dB
>50W(at1kHz 0.1 % THD) 2 ohm 210w
4 ohm 150w
8 ohm 80w
>18A (in 1 ohm, 1 ms) >100(20Hz-20 kHz) ±0.3dB(20Hz- 20 kHz) >85 dB (1 kHz)
>70 dB (10 kHz) 250 mV
>75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms) ±0.3 dB (20 Hz - 20 kHz)
Frequency response (RIAA deviation)
Note: The RIAA response is consistent with a pre-emphasis that is rolled off at 50kHz by a second order filter, such as used in Neumann cutting lathes.
Channel separation
Input sensitivity (for 40 W in 8 ohms)

DIGITAL IN/SPEAKER OUT
THD (20 Hz – 20 kHz) Signal-to-Noise Ratio Frequency response Gain

Channel separation
>80 dB (1 kHz, 8 ohms, 50 mV input, 13W out) >60 dB (10 kHz, 8 ohms, 50 mV input, 13W out) 3.6 mV
>95 dB (A-weighted, -12 dBFS input, ref. 1W out in 8 ohms) ±0.3dB(20Hz-20kHz)
47 dB (Vrms/FS)
>80 dB (1 kHz)
>70 dB (10 kHz)
Dimension :
435 x 70 x 285 mm