Extron XPA 2002 200watt x 2 Power Amplifier Impor Bekas

Key Features :
400 watts rms output power:
XPA 2002-70V - 2 x 200 watts @ 70 volts
XPA 2002-100V - 2 x 200 watts @ 100 volts
ENERGY STAR qualified amplifier
Professional grade signal-to-noise and THD+N performance
Extron Patented CDRS - Class D Ripple Suppression
Convection cooled, fanless operation
Ultra low inrush current - no need for power sequencing

Audio
Voltage gain
XPA 2002-70V 57x (35 dB)
XPA 2002-100V 81x (38 dB)
Crosstalk 75 dB (typical) @ 1 kHz
CMRR 75 dB (typical) @ 1 kHz
Audio input
Number/signal type 2 balanced/unbalanced
Connectors (2) 3.5 mm captive screw connectors, 3 pole
Impedance >10k ohms unbalanced/balanced, DC coupled
Nominal level +4 dBu (1.23 Vrms), balanced
Maximum level +21 dBu (8.69 Vrms), balanced
Input sensitivity +4 dBu (1.23 Vrms)
Input signal detection threshold -40 dBu ±3 dB, balanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
XPA 2002-70V 2 channels 70 V
XPA 2002-100V 2 channels, 100 V
Connectors (2) 5 mm screw lock captive screw connectors, 2 pole
NOTE These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
XPA 2002-70V 25 ohms minimum
XPA 2002-100V 50 ohms minimum
Amplifier type Class D
Output power
XPA 2002-70V 200 watts rms per channel, 70 V, 1 kHz, 0.1% THD
XPA 2002-100V 200 watts rms per channel, 100 V, 1 kHz, 0.1% THD
Frequency response 20 Hz to 20 kHz, ±1 dB
THD + Noise 0.1%, 1 kHz, 3 dB below clipping
S/N 100 dB, 20 Hz - 20 kHz, unweighted
Damping factor
XPA 2002-70V >100 @ 25 ohms
XPA 2002-100V >100 @ 50 ohms
High pass filter
XPA 2002-70V 80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
XPA 2002-100V 80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable)