5.0/ 5.0
100% pembeli merasa puas
41 rating • 14 ulasan
5(40)97.56%
4(1)2.44%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 9
Subtotal
Rp263.000
HobbyWing UBEC-8A (2-3S)
Rp263.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ESC & BEC's
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
======================================================================================================
The 8A-UBEC is a switch-mode DC-DC regulator works with a 2-3S Lipo battery, it outputs a consistent safe voltage for your receiver, gyro and servos.
It is very suitable for large scale RC models with many servos such as nitro powered RC helicopters and airplanes.
Specification
'' Output Voltage: 5V or 6V (Changeable with a switch )
'' Continuous output current: 8 Amps
'' Burst output current: 15 Amps
'' Input: 6V-12.6V (2-3S Lipo battery)
'' Quiescent current: 60mA
'' Size: 42mm*39mm*9mm (length*width*height)
'' Weight: 36g
Features
'' Uses advanced switch-mode DC-DC regulator IC.
'' The output current is very large to supply all electric equipments.
'' Output short-circuit protection function.
'' A metal shield and a filter significantly reduce the electromagnetic interference.
'' Automatically detects the amount of the Lipo battery pack (2S or 3S).
'' Shows the battery capacity with 4 LEDs.
'' Shows the working status with a LED, it lights when the UBEC works normally.
'' There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.
'' With a step-down voltage regulator of 0.7V down as accessory
(It changes the output from 6.0V to 5.3V for some special equipments that cannot work with 6V inputs).
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
======================================================================================================
The 8A-UBEC is a switch-mode DC-DC regulator works with a 2-3S Lipo battery, it outputs a consistent safe voltage for your receiver, gyro and servos.
It is very suitable for large scale RC models with many servos such as nitro powered RC helicopters and airplanes.
Specification
'' Output Voltage: 5V or 6V (Changeable with a switch )
'' Continuous output current: 8 Amps
'' Burst output current: 15 Amps
'' Input: 6V-12.6V (2-3S Lipo battery)
'' Quiescent current: 60mA
'' Size: 42mm*39mm*9mm (length*width*height)
'' Weight: 36g
Features
'' Uses advanced switch-mode DC-DC regulator IC.
'' The output current is very large to supply all electric equipments.
'' Output short-circuit protection function.
'' A metal shield and a filter significantly reduce the electromagnetic interference.
'' Automatically detects the amount of the Lipo battery pack (2S or 3S).
'' Shows the battery capacity with 4 LEDs.
'' Shows the working status with a LED, it lights when the UBEC works normally.
'' There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver.
'' With a step-down voltage regulator of 0.7V down as accessory
(It changes the output from 6.0V to 5.3V for some special equipments that cannot work with 6V inputs).
Ada masalah dengan produk ini?