Download Tokopedia App
Tentang TokopediaMitra TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori

PFJT01

Atur jumlah dan catatan

Stok: 251

Subtotal

Rp153.000

READY Perfin PFJT01 Mini dry Iron Setrika Listrik Uap Portable Travel Meja Setrika Gosokan Listrik White - PFJT01

Rp153.000

Pilih model: PFJT01

  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Nama Merek: Perfin

Model produk: PFJT01

Rated power: 400W

Rated voltage: 200V

Control method: 3-speed temperature control

Rated frequency: 50HZ

Ironing function: dry ironing

color: White

The correct use of steam iron:

1. The yellow and green two-color wires in the power core wire should be grounded before use to prevent the risk of electric shock in case of electricity leakage.

2. Raise the front end so that the water inlet is upward, and the measuring cup will slowly fill the boiling water from the water inlet. The amount of water to be added depends on the volume of the iron reservoir.

3. For an electric iron equipped with a water level glass, the iron can be erected, observe the water level in the water reservoir, and add water as required.

4. The name of the fabric on the steam iron's fabric sign is basically the same as that of the tempered iron. The difference is an additional "steam" mark.


If water has been added to the iron, steam should "spray" to iron.

6. Dry ironing can be done with a steam iron. The method is to adjust the temperature according to the type of fabric being ironed.

Control knob to select the proper base plate temperature. After that, adjust the steam knob to the "0" position.




Four methods of decontamination in daily use of electric irons: When ironing clothes, due to the high temperature or improper operation, the smooth bottom plate will often be stained with dirt, which affects the effect of ironing clothes.

Decontamination method:

① After applying a small amount of toothpaste on the dirt, wipe it vigorously with a clean cotton cloth to remove the dirt;


③ The electric iron is preheated to about 100 ° C, cut off the power supply, apply a small amount of baking soda to the dirt, and wipe it back and forth with a clean cloth to remove the dirt;

④ The bottom plate with serious dirt can be polished with cloth dipped in polishing paste to protect the plating layer.

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan