5.0/ 5.0
100% pembeli merasa puas
181 rating • 39 ulasan
5(181)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Blue
Atur jumlah dan catatan
Stok: 9.939
Subtotal
Rp365.000
eSUN Hard Tough Resin 0.5 Liter Bottle for MSLA LCD DLP 3D Printer - Blue
Rp365.000
Pilih warna: Blue
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: eSUN Resin
eSUN Hard Tough Resin 0.5 Liter Bottle for MSLA LCD DLP 3D Printer
Isi 0.5 liter per botol
3D Zaiku Indonesia adalah Distributor Tunggal/Satu-satunya eSUN Filament untuk Indonesia
Cocok untuk print bahan yang butuh kekuatan lebih, seperti part-part otomotif, alat kedokteran, part drones, dan alat elektronik
This is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.
Hard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:
1. High impact strength;
2. Higher shock resistance than normal resin;
3. Rigid resin, excellent mechanical properties such as hardness, tensile and bending;
4. High surface hardness and wear resistance.
Print setting
Applicable wavelength: 395-405nm
Operating temperature: 18-35 ° C
Exposure time: 20-30s on the bottom layer, 8s on the normal layer
Pls adjust the setting until you get the best print performance.
Warna :
- Blue
- Black
- Grey
- White
Isi 0.5 Liter
Jenis :
For LCD 3D Printer (Photon, Creality, Anet, Sparkmaker, Phrozen, Peopoly, dll)
Bisa dipakai untuk Flashforge Hunter dan juga Anycubic Photon
Resin premium hasil print lebih bagus
Isi 0.5 liter per botol
3D Zaiku Indonesia adalah Distributor Tunggal/Satu-satunya eSUN Filament untuk Indonesia
Cocok untuk print bahan yang butuh kekuatan lebih, seperti part-part otomotif, alat kedokteran, part drones, dan alat elektronik
This is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.
Hard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:
1. High impact strength;
2. Higher shock resistance than normal resin;
3. Rigid resin, excellent mechanical properties such as hardness, tensile and bending;
4. High surface hardness and wear resistance.
Print setting
Applicable wavelength: 395-405nm
Operating temperature: 18-35 ° C
Exposure time: 20-30s on the bottom layer, 8s on the normal layer
Pls adjust the setting until you get the best print performance.
Warna :
- Blue
- Black
- Grey
- White
Isi 0.5 Liter
Jenis :
For LCD 3D Printer (Photon, Creality, Anet, Sparkmaker, Phrozen, Peopoly, dll)
Bisa dipakai untuk Flashforge Hunter dan juga Anycubic Photon
Resin premium hasil print lebih bagus
Ada masalah dengan produk ini?